Menu Buttons Click for the Home Page Click Information on Hansatech Instruments Click for the Products Section Click for the Support Section Click for Contact Details

You are in: Products > Oxygen Measurement > Electrode Chambers > DW1

Hansatech Instruments DW1 Liquid-Phase Electrode Chamber

DW1 Liquid-Phase Electrode Chamber

  Cast acrylic construction provides good visibility and uniform illumination of samples.
  Ideal electrode chamber for teaching purposes with all the functionality of research equipment.
  Variable volume reaction chamber between 0.2 and 2.5ml.
  Base mounted S1 oxygen sensor forming the floor of the borosilicate glass reaction chamber.
  Water jacket for effective temperature control of the sample.

Overview

The DW1 oxygen electrode chamber provides a versatile solution to measurements of dissolved oxygen in liquid-phase. It can be used for a wide range of applications from basic teaching through to more advanced research assays.

The DW1 oxygen electrode unit is constructed from clear cast acrylic providing good sample visibility and uniform illumination. Precise temperature control of the sample and electrode disc can be achieved by connecting the water jacket of the DW1 to a thermoregulated circulating water bath. The sample is housed within a borosilicate glass reaction vessel which has a variable sample volume of between 0.2 and 2.5ml controlled by an adjustable plunger assembly. This plunger has a central precision bore allowing additions/subtractions to be made to/from the reaction mixture using a standard Hamilton type syringe. A prepared S1 electrode disc is mounted in the bottom of the DW1 electrode chamber allowing the dome of the disc to form the floor of the reaction vessel itself.

The DW1 provides a valuable, reliable tool in any laboratory where dissolved oxygen measurements are required.

DW1 Spare Parts List

Spare Parts for the DW1 Electrode Chamber

  A: Plunger screw
Part No. 820024
  B: Plunger nut
Part No. 820025
  C: Reaction vessel
Part No. S3, pack of 2
  D: Magnetic follower
Part No. S2/P or S2/G
  E: Base plate O-ring
Part No. S5
  F: Electrode disc
Part No. S1
  G: Base ring
Part No. 820023
  H: Water jacket and bottom plate
Part No. 941020
  I: Water jacket connectors
Part No. 820026, 2 required
  J: Top plate
Part No. 820021
 

Click to go to the Top of this Page
 
Quick Links
Hansatech Instruments Product Literature Hansatech Instruments Ltd. Worldwide Distributor Network Hansatech Instruments Customer Support Article on Electrode Disc Maintenance
 

Copyright© Hansatech Instruments Ltd 2007. All rights reserved. Terms & Conditions Legal Disclaimer Sitemap

Valid XHTML 1.0 Transitional     Valid CSS!