| |
Convenient, low-cost system for teaching of photosynthesis & respiration measurements using oxygen electrode.
|
| |
DW1/AD electrode chamber with base mounted S1 oxygen electrode disc.
|
| |
Oxyview electrode control unit with integral magnetic stirrer.
|
| |
Oxygen content of sample displayed as digital or percentage value.
|
| |
User-friendly configuration via a responsive 4 button control panel and a series of comprehensive menu screens.
|
| |
Analogue output for connection to a chart recorder or other external recording device.
|
| |
Minimal footprint (90 x 135mm) allowing multiple units where bench space is limited.
|
The Oxyview System is based around the new Oxyview electrode control unit. Oxyview has been designed in response to the ever-increasing demand for a low-cost system for teaching photosynthesis and respiration measurements using oxygen electrode techniques.
The system is designed to be used in a busy teaching environment where bench space is limited. Configuration is achieved by using the 4 button capacitive control panel to navigate through a series of menu screens which provide simple, brief guidelines progressing from setting the stirrer speed to calibration of the oxygen electrode disc.
The Oxyview control unit provides a variable polarising voltage (default 0.7V) to the S1 electrode disc and displays the measured signal in either digital or percentage modes.
Click
this link for further information on the Oxyview 1 system.
