Current Software Versions

Please select the download you require from the list below.

FMS Systems Software

The download installs both ModFluor32 and Parview32 software programs for the FMS 1, FMS 1+, FMS 2 and FMS 2+ systems.

Download FMS Systems Software | Version: 3.11 | 55.8Mb | 99 downloads
M-PEA Software

The download installs the M-PEA+ software for M-PEA-1 and M-PEA-2 variants.

Download M-PEA Software | Version: 1.11 | 46.3Mb | 35 downloads
O2View Software

O2View software is suitable for use with legacy oxygen electrode control units that connect to the PC either via RS232 or using an RS232-USB adapter. The control units supported include:

  • Oxygraph
  • Oxytherm
  • Oxylab

This software will only operate control units connected via  RS232 or an RS232-USB adapter. For software for the new USB only connected control units, please download OxyTrace+ software.

Please note that this version is not compatible with Windows XP operating systems. Please download the O2ViewXP version below.

Download O2View Software | Version: 2.10 | 97.7Mb | 265 downloads
O2ViewXP Software

O2ViewXP software is suitable for use with legacy oxygen electrode control units that connected to a Windows XP PC either via RS232 or using an RS232-USB adapter. The control units supported include:

  • Oxygraph
  • Oxytherm
  • Oxylab

This software will only operate control units connected via  RS232 or an RS232-USB adapter. For software for the new USB only connected control units, please download OxyTrace+ software.

Please note that this version is not compatible with non-Windows XP operating systems. Please download the O2View version above.

Download O2ViewXP Software | Version: 2.10 | 97.7Mb | 43 downloads
OxyTrace+ Software

OxyTrace+ software is suitable for use with oxygen electrode control units that connect to a PC via USB. The control units supported include:

  • Oxygraph+
  • Oxytherm+
  • Oxylab+

This software will not operate the legacy Oxygraph, Oxytherm or Oxylab control units.

Please note that this version is not compatible with Windows XP operating systems.

Download OxyTrace+ Software | Version: 1.0.48 | 602Mb | 121 downloads
PEA+ Software

PEA+ software is suitable for use with:

  • Handy PEA (PC connection via RS232 or RS232 - USB adapter)
  • Handy PEA+ (PC connection via USB only)
  • Pocket PEA (Bluetooth).

Please note that this version is not compatible with Windows XP operating systems. Please download the PEA+XP version below.

Download PEA+ Software | Version: 1.13 | 81.9Mb | 246 downloads
PEA+XP Software

PEA+XP software is suitable for use with:

  • Handy PEA (PC connection via RS232 or RS232 - USB adapter)
  • Handy PEA+ (PC connection via USB only)
  • Pocket PEA (Bluetooth).

For Windows XP PC's only.

Please note that this version is not compatible with non-Windows XP operating systems. Please download the PEA+ version above.

Download PEA+XP Software | Version: 1.13 | 81.6Mb | 51 downloads

Technical Support Policy

  • Purchasers of Hansatech Instruments products can be assured of ongoing support and prompt and efficient attention to enquiries at all times
  • All products supplied by Hansatech Instruments are guaranteed for 12 months from the time of dispatch against manufacturing faults or defective materials
  • The guarantee does not cover damage caused by misuse or unauthorised attempts to repair
  • If difficulties are experienced with the equipment, please contact Hansatech Instruments for technical advice
  • If necessary, equipment may be returned for repair/replacement during the warranty period. No charge will be made for parts/labour under warranty but we reserve the right to charge for customs clearance and return carriage if appropriate
  • If the product was purchased via a distributor, please contact them for advice in the first instance
  • For repairs outside of the warranty period, either contact Hansatech Instruments directly or, if the product was purchased via a distributor, please contact them for advice in the first instance.